Re: NPM add a node - option "Active Directory Domain Controller" ?
Hello, not 100% sure, but as far as I rememember this checkbox belongs to the UDT product (do you have it installed) and by checking it and fiilling should cause adding it to UDT as Domain controller...
View ArticleRe: Change cisco temperature from fahrenheit to Celsius
superfly99It is strange that you have beside Temperature Unit description "This allows the user to view the Real-Time Process Explorer."- It is normally beside "Real-Time Process Explorer" settings.
View ArticleRe: Change cisco temperature from fahrenheit to Celsius
Hi,you can configure temperature units in three ways.- In Settings - Manage Accounts - Edit user account - In "Hardware Health Package Settings" section. There is "Temperature Unit".- In Settings -...
View ArticleClik here to view.
Re: Topology Polling Appearing To "Crash" Router
Actually if you will just turn off routing resources and multicast in the node/list resources, you can re-enable topology resources. It's the walk of the ip route tables that causes the problem. It's...
View ArticleWhat's the best way to find nodes which are ICMP up but not responding to SNMP?
I have a few nodes (especially net-snmp Linux) which are finicky when coming back up and often need SNMP service restarted. While it's easy for me to spot them, Node UP but hardware health, volumes,...
View ArticleClik here to view.
Re: What's the best way to find nodes which are ICMP up but not responding to...
Spent a few minutes - here's the best I have - SELECT N.caption as Node, '/Orion/NetPerfMon/NodeDetails.aspx?NetObject=N%3a' + ToString(N.nodeid) AS [_LinkFor_Node],...
View ArticleInterface Name Construction
Is it possible to set the default Interface name construction to only include: ifName instead of the concatenation of IfDescr - ifName? The ifDescr for our switches is excessively long - which makes...
View ArticleRe: What's the best way to find nodes which are ICMP up but not responding to...
you can also check lastsystemuptimePollUTC < dateadd(minute,-3,getutcdate()) which will pick nodes even if there are o child interfaces/volumes(my poll time is 2 minutes, so one missed poll shows up)
View ArticleClik here to view.
Re: How does Advanced Alert Manager handle the Last Boot has changed condition?
Here are the trigger setup and the events that we are looking at. These events occur and there is nothing being sent out as an email. Even using just last boot has changed by itself is not working at...
View ArticleRe: How does Advanced Alert Manager handle the Last Boot has changed condition?
dkeyser, I assume you configured a email trigger action and it is not sending and email. Regards,Adam StephenLoop 1 SystemsRemote Engineer Level 2www.loop1systems.com
View ArticleRe: How does Advanced Alert Manager handle the Last Boot has changed condition?
dkeyser, Also if you could send me a screenshot of the reset condition and your trigger actions tab that would be great.Thanks,Adam StephenLoop 1 SystemsRemote Engineer Level 2www.loop1systems.com
View ArticleRe: Re: Show us a NOC view and get 500 thwack points!
>> I like the line utilization on the map. Will you share with us how you did this? I would like to do something similar. Sure I will ! Sorry for the delay, I haven't logged-on in a bit. Here's...
View ArticleRe: What's the best way to find nodes which are ICMP up but not responding to...
This is exactly the same issue we have here: NPM Alert on Node UP (Ping) SNMP DOWN (unknown / unresponsive)And a request for Solarwinds to natively support this problem here:...
View ArticleClik here to view.
Re: What's the best way to find nodes which are ICMP up but not responding to...
after plenty of testing today I can say that node up but childstatus = 0 is a good indicator except maybe where there are no child objects or hardware health to poll over SNMP. I'm interested to try...
View ArticleRe: Fresh Installation for NPM 10.6.1 and no Virtualization tab
Thank you guys for helping out, I checked the Settings table and found no Virtualization.Tab.Enabled, it seems like it has been removed form this version of NPM.
View ArticleClik here to view.
Re: Fresh Installation for NPM 10.6.1 and no Virtualization tab
I have integrated Orion with Virtualization Manager, and the virtualization tab is showing. Thank you!
View ArticleClik here to view.
Re: Interface Name Construction
No, this cannot be changed, but you can edit Interface Name on Interface Edit page.In Node Management select the interface and Edit Properties. Or run the queryUPDATE Interfaces SET Caption=ifName...
View ArticleRe: The node "is currently down, unreachable, or provided credentials are not...
That's a pretty strange issue. Have you tried to remove and re-add a node that is affected?
View ArticleRe: Trying to query last month and have it show each date
Can you perhaps post what you have presently?
View Article
