Re: Out of Box Polling OID's
Jonathan is correct, we pull SysObjectId and use this value to look into a database we maintain. Most likely, that Polycom unit is running linux underneath, and it's configured to return the...
View ArticleRe: NPM 10.4.1 Remote Poller Ports
NPM and the remote server should only be communicating on port 17777. The remote poller also connects to the DB directly, so you'll need to open that port as well.
View ArticleRe: NPM 10.4.1 Remote Poller Ports
Casey is right, please take a look at http://www.solarwinds.com/documentation/Orion/docs/OrionAdministratorGuide.pdf on page 13 is Orion Server Software Requirements section listing all required ports
View ArticleRe: Out of Box Polling OID's
Jonathan, thank you for your help with this and also to Casey for confirming. Very much appreciated.
View ArticleRe: NPM 10.4.1 Remote Poller Ports
As when after setting up the poller in Centreon, the configurations are being transferred over perfectly fine, Music Download and I can see host and service status checks in the nagios log. Artist...
View ArticleRe: SNMP issue?
Does the issue remain if you remove that ACL from the SNMP RO statement?
View ArticleClik here to view.
Re: How to create an alert for interfaces down for a specified period of time
An update to this, The custom SQL trigger condition works perfectly some results: Switch Name: SWITCH_1 Switch Status: UpSwitch Location: Building 1Interface: SWITCH_1 - Port 1/0/5 · Unit: 1 Slot: 0...
View ArticleRe: Palo Alto with SNMP V3
For the 2050, here is what I had to do: Under Device->Setup-Operations, click on SNMP setupEnter the physical location field, contact, change from v2 to v3Add a new View; name=Solarwinds...
View ArticleRe: Tabular UDP chart doesn't translate to a view??
Anyone from Product mgmt care to respond?
View ArticleRe: NPM 10.4.1 Remote Poller Ports
You're right. I setup an additional poller today and used wireshark to verify what traffic was passed.It's about 98% SQL calls from the additional poller to the database and 2% tcp/17777 traffic both...
View ArticleRe: Tabular UDP chart doesn't translate to a view??
Hi Andrew, thanks for your input. From what I see above, the new chart is showing statistics data as well but the scale on Y axis is just too big comparing to old chart below. But more importantly, I'm...
View ArticleRe: Cannot monitor CPU, RAM, packetloss of Fortigate
Thanks to this post. I also get in this trouble and find out the solution by here.First I know how to use UnDPSecond I know how to search a specific MIB in the huge list of MIBs which Solarwind...
View ArticleDynamic time in report
Hi, I was wondering if it is possible to create a report that shows the datetime value in the timezone of the browser it is being displayed in.e.g. in report writer I populate a column with a datetime,...
View ArticleRe: 10.4 hardware health monitoring - anybody know what a bias current sensor...
Running 10.4.1 here and I have the same errors, looks like a move to 10.4.2 fixes this.
View ArticleRe: Cisco ASA as a network Device
What is NPM showing it as? Unknown? Also what version of software is running on this and what model ASA?
View ArticleRe: Cisco ASA as a network Device
I don't believe the ASA supports the OIDs that Hardware Health polls.I'm running NPM 10.3.1, monitoring ASA 5520s, 5540s, and 5585-Xs. The ASAs are running 8.2(x) and 8.4(x). None of these devices...
View Articlepollers do not save the timestamp in the same format (e.g. UTC) into the...
I have JUST been hunting this issue down, as part of a larger problem (a 1 hour gap in data collection due to DST, which caused several hundred time-based alerts to fire). Look for a more comprehensive...
View ArticleRe: pollers do not save the timestamp in the same format (e.g. UTC) into the...
Hi adatole, I branched your post because it had nothing to do with my original post (I am trying to create a Report from Report Writer where the time will be dynamic depending on the timezone of the...
View Article
