Re: Tell us your "Unknown" devices!
Still showing as unknown:Machine type is showing: smartups8000 SysObjectID 1.3.6.1.4.1.318.1.3.2.19 rgds
View ArticleRe: TIPS & TRICKS: Stop the madness! Avoiding alerts but continuing to pull...
Hi Leon First I like to say thanks sharing your wisdom and experience.I like the "i_mute"and the "n_mute" . I play with the "mute" so there is alert but no trigger of sms or email to the noc. So I...
View ArticleClik here to view.
Got a question about File System monitoring
So I have a filesystem that the OS reports at 100% but solarwinds shows the usage as 76% $ df Filesystem 1K-blocks Used Available Use% Mounted on/dev/sda2 10079084 4739152...
View ArticleRe: Unreachable Status with Advanced Alert Rules
Thanks for the reply @zackm. You do raise a good point. The reason for my logic was that I did not want to automatically exclude any new statuses that SolarWinds might add in the future. For example...
View ArticleRe: Nexus 7k/5k/2k hardware monitor support
Please post ticket number and results when you get them. Thx.
View ArticleRe: Unreachable Status with Advanced Alert Rules
Fair enough. I would think that a problem like this would be due to the dependency of the child to the parent. It almost seems as though the parent has 'Unreachable' somewhere in relation to the child,...
View ArticleRe: High Number of Discards from ASA-5505 Interfaces
If anyone of you found the reason or solution, let me know. I have a same situation with 5505.
View ArticleUser audit information on home screen stopped working
We had the "last 15 audit events" working fine for a while. They apparently stopped a couple weeks ago. What is the proper procedure to get this "audit events" feature to start working again?
View ArticleClik here to view.
Re: User audit information on home screen stopped working
My first question would be did someone uncheck Enable Audit Trails under Web Console Settings.
View ArticleRe: Load Balance Traps
There should be a setting within your LB to retain the original source IP. In our netscalers it's per service. We had the same issue because by default we NAT that IP. After I had our engineers turn...
View ArticleRe: Account limitation best practises
That's a very 'it depends' kind of question... Your best bet would be to map out a schema on the whiteboard and envision who needs to see what. Once you get that down, I would try and identify...
View ArticleAdtran QoS Queue Monitor
Greetings Thwack Community, I am having trouble creating a custom poller in Orion to monitor our QoS queues (dropped packets, usage, etc). I have the proper MIB and OIDs from Adtran, and can create...
View ArticleRe: Server is up but NPM shows node down?
Despite the fact we can ping from the server, I'm betting there's some sort of ICMP redirect going on there. A ticket open with our support team should get it sorted: SolarWinds Customer Support -...
View ArticleRe: Adtran QoS Queue Monitor
Nkoos: here's a 10-minute tutorial to get you started: Video Tutorial: Universal Device Poller in Orion NPM - Videos | SolarWinds
View ArticleHigh Discards on F5 Devices
Hello, I was looking at the Network tab on NPM and I noticed the resource "High Discards & Errors Today" was pretty much a list of every single F5 load balancer in the network, with discards...
View ArticleCisco ASA VPN and SNMP
Since the ASA devices do not current allow us to access the crasUsername OID, Cisco has offered a work around o fusing the OID 1.3.6.1.4.1.9.9.392.1.3.21.1.2, and then parsing/converting the ASCII...
View ArticleRe: High Discards on F5 Devices
Firstly we may want to check on the F5s themselves to see if they are seeing the same stats. Should be available through the UI. Perhaps the F5s are hitting their connection limit and starting to drop...
View ArticleClik here to view.
Re: Cisco ASA VPN and SNMP
Afraid not, but I am following with interest as I would love to know how to do this!
View Article