Re: Can I view custom property variable labels for both members of a network...
Sure- create link -add two interfaces to the link and then see variables for those links show up on the correct "side" of the link. Take the new utilization weather maps on network atlas w10.7- makes...
View ArticleRe: NPM 10.5 Custom Report with Multiple Universal Device Pollers?
I might be asking a little too much, but would this work the same for Cisco Nexus 7k devices? I modified the reports you sent me to use the cefcFanTrayOperStatus (1.3.6.1.4.1.9.9.117.1.4.1.1.1) and...
View ArticleRe: Re: NPM 10.5 Custom Report with Multiple Universal Device Pollers?
I don't have a Nexus to test this against so I can't get a good test in the database. Try this in the database to see if you're getting any results: SELECT n.CAPTION ,cp.UNIQUENAME ,cps.STATUS FROM...
View ArticleRe: how to identiy the user utilising the bandwidth
That you can achieve through Netflow traffic analyzer, top transmitter or top receiver for that link.
View ArticleNeed a report of non-responding IPs during Discovery
I recently ran a discovery using a list of 367 IP addresses. The discovery yielded 295 responding IPs. How can I create a report that will show me scanned IPaddresses that did not respond to...
View ArticleRe: NPM+NTA Database Sizing
It's pretty much impossible to answer this question with any input.It's likelly that your disk space is going to be driven by NTA, which now (in NTA 4.0) has a dedicated database to store flow data...
View ArticleSolarwinds Information Service Errors
We are currently having performance issues with our Orion NPM Web Console and applications.I've looked through the logs and I can see errors of the form: ERROR...
View ArticleMy TFTP Server will not start on NPM server
For some reason my TFTP Server will not start on NPM server. I had to do an SNMP config push to a node which we were locked out of recently and found that my TFTP server which resides in the Engineers...
View ArticleRe: Device Discovery in NPM 10.6
Tried in Chrome, Firefox and IE, doesn't seem to be browser specific.
View ArticleDoes NPM can poll device if SNMP traffic is encrypted via HTTPS proxy tunnel??
we have a requirement to monitor a device but communication inbetween our network(~NPM) and customer network will happen via HTTPS proxy tunnel so does NPM supports this type of setup for polling?...
View ArticleRe: Does NPM can poll device if SNMP traffic is encrypted via HTTPS proxy...
Any connection type is supported as long as: 1. Firewall on both ends permit the use of Orion's polling protocols (ICMP, SNMP etc) both ways.
View ArticleRe: Does NPM can poll device if SNMP traffic is encrypted via HTTPS proxy...
Thanks for the quick response.Customer firewall doesn't allow any port or protocol other than 443. All ports are opened in between device and customer firewall but only 443 (https proxy) is opened...
View ArticleRe: Does NPM can poll device if SNMP traffic is encrypted via HTTPS proxy...
You cannot change the ports that Orion uses to monitor with but you can redirect all traffic to a specific port through the firewall, in your case port 443. This is something that you have to configure...
View ArticleRe: Does NPM can poll device if SNMP traffic is encrypted via HTTPS proxy...
Thanks Deltona for the quick response. Based on earlier discussion with customer,they haven't agreed on VPN solution. Does redirection of all traffic to a specific port through the firewall need to be...
View ArticleRe: Web-reporting in 10.6 - Unexpected Website Error
They said using "group" this way is a bad idea, and I should consider using custom properties instead. Seems a bit unrealistic and tedious to use a customer property for something a group was built to...
View ArticleRe: Does NPM can poll device if SNMP traffic is encrypted via HTTPS proxy...
I used a TCP/IP server based tool long ago that could redirect all traffic to a specific port but it didn't work out as expected because source data (source IP and port) got stripped by the...
View ArticleRe: The secret lives of web-based reports
All, Maybe the kind folks watching this post can help me on a related issue: Web-reporting in 10.6 - Unexpected Website Error Thoughts and ideas?D
View ArticleRe: Customizing NCM report
Hi, Your question doesn't seem to be related to NCM. Moving to NPM space. Regards,Jiri
View ArticleRe: CONNECTION TO THE INFORMATION SERVICE HAS BEEN LOST AND COULD NOT BE...
Hi adi adi, Was wondering what resolution you got for this issue? I am also having it. Thanks!
View Article