Clik here to view.
F5 SSL Connection Alert including the incorrect devices
I am attempting to create an alert for our F5 load balancers, specifically if there aren't any SSL connections on the active server but reduced to only certain F5 devices. The issue I am seeing has to...
View ArticleClik here to view.
Re: F5 SSL Connection Alert including the incorrect devices
Answered the question myself....the inclusion of NodeID 1049 into the list was causing a false alert from this device b/c it doesn't use SSL. I ended up using the logic in the attached screenshot to...
View ArticleRe: how can I update the "node details" "operating system" values?
Is there some way to surpress the (meaningless) fields for Cisco-only devices in the Node Details view/Node Details resource then? ["Operating System" blank] ----- is not at all helpful; ["IOS...
View ArticleClik here to view.
Re: Is it possible to trigger alert if amount of traffic interface...
hi Mesebua, did you manage to make it work? can you share? Im looking for same solution too.
View ArticleRe: Custom Poller Alerting on Wrong Custom Poller?
Can you post a screen shot of your alert trigger as well as the OID that you want to alert on?
View ArticleClik here to view.
making customer views
Hi there- We are a service provider, delivering internet and private wan connectity (mpls/vpls). I am attempting to give customers a good view of their CPE. I want them to see loss/latency/jitter to...
View ArticleRe: SNMP Traps / Syslog Alert Triggering and Subsequent Suppression
Orion's Syslog and Trap services are pretty basic when it comes to alerting and data retention. Regrettably it cannot currently handle per-host alerting like the Advanced Alert Manager as it is more...
View ArticleRe: OID for monitoring active calls on Cisco 2811/3845 ISR?
You may find what you're looking for in the ciscoSipCallsMIB: Cisco SNMP Object Navigator Cheers
View ArticleRe: Top 10 wireless devices by traffic showing 0 traffic
I would open a support ticket. It could be a polling issue (although this would generally effect more) or perhaps something wrong with the device reporting its values but to be sure it definitely...
View ArticleReport Writer/Web GUI - Is target="_blank" supported when included in Web URL...
In Field Formatting tab, I have hyperlinked a field using the Web URL attribute to another report and works fine executed from web gui using the 'Report from Report Writer' resource. However, I would...
View ArticleNetwork Sonar Discovery and SNMPv3
Is there a particular reason that we are not allowed to use the saved SNMPv3 credentials in a Sonar Discovery scan? The drop box only shows "New Credentials" and none of the ones we have saved.
View ArticleRe: Report Writer/Web GUI - Is target="_blank" supported when included in Web...
Would you perhaps be able to post screenshot of where we're trying to create the link?
View ArticleClik here to view.
Unknown Additional Interfaces as Uncontrolled/Controlled on SUP8
We've been in the process of upgrading some of our core switches within branch offices. Most of them are Catalyst 4506, 4507R, and 4510R Chassis with single or dual supervisor modules. Part of this...
View ArticleRe: Unknown Additional Interfaces as Uncontrolled/Controlled on SUP8
Are you using 802.11X port security? Those look like virtual interfaces used for 802.11X authentication.
View ArticleRe: Unknown Additional Interfaces as Uncontrolled/Controlled on SUP8
I don't think that we are. We are running Enterprise Services, but we did as close to an in-place upgrade as we could. Of course we had to reconfigure several of the interfaces because they no longer...
View ArticleClik here to view.
Re: Unknown Additional Interfaces as Uncontrolled/Controlled on SUP8
Attempting to disable this globally yields a notification:XXXX-4507R-CORE(config)#no ip device tracking% IP device tracking is disabled at the interface level by removing the relevant configs There's a...
View ArticleRe: Unknown Additional Interfaces as Uncontrolled/Controlled on SUP8
I also used a recommendation from the Bug page, which is to use "ip device tracking maximum 0" on an interface, but it still shows up.
View ArticleRe: Desktop Notifications for Orion
ok, this looks like growl for windows: Growl for Windows running on the desktop how do you get the alert manager to talk to it?
View ArticleRe: Desktop Notifications for Orion
GrowlNotify for Windows It's not too difficult to figure out. You can pass variables to a batch script and parse them out in to the notification text that then executes the GrowlNotify application to...
View Article